Sweet Spot for Motorbunny BUCK: Positioning and Use Tips

By Motorbunny - New Riding Sex Toys and Sex Machines | Published: 2026-10-30

Category: How-to Guides

Learn how to position and use the Sweet Spot attachment on your Motorbunny BUCK for maximum G-Spot stimulation. Includes setup, angle tips, and common mistakes to avoid.

Quick answer

The Sweet Spot attachment for Motorbunny BUCK is designed for targeted G-Spot stimulation. Proper positioning starts with aligning the curved tip toward your front body wall and using the G-Thrust motion toggle to adjust the angle mid-ride.

Why positioning matters more than speed

The Sweet Spot's curved shape is engineered to press against the G-Spot, but that only works if the curve faces the right direction. Many users set it up intuitively and then wonder why it doesn't hit the spot. The attachment is 4.45 inches long with a 3.6-inch circumference, so it's compact enough to maneuver without overwhelming. The key is the angle of entry, not the power level.

When the Sweet Spot doesn't feel right

If the sensation is too direct or misses entirely, check the orientation. The Sweet Spot is symmetrical front-to-back, so flipping it 180 degrees changes the curve direction. Also, because it's made of premium 100% silicone, it has a bit of grip — use a compatible lubricant if you feel drag. The attachment pairs best with the G-Thrust motion toggle (sold separately), which lets you adjust the thrusting angle without stopping.

How to position and use the Sweet Spot attachment

Attach and orient the curve: Slide the Sweet Spot onto the BUCK's mounting post until it clicks. The curved tip should face upward (toward your front body wall) for G-Spot stimulation. Common mistake: installing it backward, which directs the curve away from the G-Spot. Check orientation before you start — the curve must point toward your belly.
Set the motion toggle to G-Thrust: If you have the G-Thrust motion toggle, select it. This setting changes the thrust angle so the Sweet Spot rocks upward with each stroke. Without it, the attachment thrusts straight in and out. Common mistake: using a straight thrust pattern and wondering why you don't feel targeted pressure. G-Thrust toggle is optional but makes a noticeable difference in G-Spot targeting.
Adjust ride angle with your body position: Lean back slightly or tilt your hips forward to change how the Sweet Spot contacts your G-Spot. Small shifts of 10–15 degrees can turn a missed spot into direct pressure. Common mistake: staying in one position and increasing speed instead of adjusting angle. Angle matters more than power — experiment with hip tilt before raising the speed.
Use lubricant and reapply as needed: The 100% silicone material has natural grip. Apply a water-based lubricant to the attachment and yourself. Reapply after 10–15 minutes or if you feel any pulling. Common mistake: using silicone-based lube, which can degrade the attachment over time. Stick with water-based lubricant to protect the silicone surface.

Product facts

"Sweet Spot" for Motorbunny BUCK: Made of premium, 100% silicone, 3.6" circumference, 4.45" length. Pairs best with G-Thrust motion toggle (not included). Same as the attachment included in the Motorbunny BUCK box. The silicone material needs proper lubrication, and the compact size means you can fine-tune the angle without removing the attachment.
"Sweet Spot" for Motorbunny BUCK