Motorbunny Riser: Setup and Use Guide
By Motorbunny - New Riding Sex Toys and Sex Machines | Published: 2026-10-29
Category: How-to Guides
Learn how to set up and use the Motorbunny Riser for your Original model. Step-by-step instructions, common mistakes, and compatibility tips.
Quick answer
The Motorbunny Riser is a simple accessory that raises the height of your Motorbunny Original for more comfortable positioning. Setup takes less than a minute, but it is only compatible with the Original model, not the Buck.
Why use the Riser?
If you find the standard height of your Motorbunny Original a bit low for your preferred riding angle or partner positioning, the Riser adds a stable lift. It is a low-cost, no-tools solution that can make sessions more comfortable and accessible.
Keep in mind that the Riser is designed exclusively for the Motorbunny Original. It does not fit the Motorbunny Buck, so check your model before ordering.
What you need to know before buying
The Riser is sold individually, so if you need more than one (for example, to raise both front and back), you will need to order multiple units. Each Riser is a simple plastic piece that slides onto the leg of the machine.
Because it is a small accessory, it is easy to misplace during storage or transport. Consider keeping a spare on hand if you frequently adjust your setup.
Step-by-step setup and use
- Check compatibility: Confirm you have a Motorbunny Original. The Riser will not fit the Buck model. Look for the model label on the base of your machine. If you own a Buck, skip this accessory. The Riser is only for Original.
- Position the Riser: Slide the Riser onto the leg of the Motorbunny Original from the bottom. Push it up until it sits flush against the base of the machine. It should click or fit snugly without wobbling. Make sure the Riser is fully seated. A loose Riser can shift during use and affect stability.
- Adjust for both legs (optional): If you want to raise both sides evenly, repeat step 2 on the other leg with a second Riser. For a slight tilt, use only one Riser on the front or back leg. Using only one Riser creates an angle. Test the stability before full use to avoid tipping.
- Test the setup: Gently press down on the machine to ensure the Risers are secure. Then, sit or position yourself as you normally would to check the new height feels comfortable. If the machine feels unstable, remove the Risers and reinstall them, ensuring they are fully pushed up.
- Store safely when not in use: Remove the Risers by sliding them off the legs. Store them in a small bag or container near your machine so they do not get lost. Risers are small and easy to misplace. Keep them with your other Motorbunny accessories.
Product facts
- Riser: Only compatible with Motorbunny Original. Not compatible with Motorbunny Buck. Before buying, confirm you have the Original model to avoid a return. The Riser will not fit the Buck's leg design.
Riser - Riser: Sold individually; available in different height options. If you need to raise both legs, purchase two Risers. Choose the height that best matches your comfort needs.
