Motorbunny Original Cover: Fit, Care, and Replacement Guide
By Motorbunny - New Riding Sex Toys and Sex Machines | Published: 2026-10-27
Category: Tips & Care
Learn how to fit, clean, and replace the Motorbunny Original Cover. This guide covers the water-resistant nylon cover, care steps, and when to swap for a fresh one.
Quick Answer
The Motorbunny Original Cover is a water-resistant nylon sleeve that protects your machine and makes cleanup easy. This guide covers fitting, washing, and knowing when to replace it.
Why the Original Cover Matters
The Motorbunny Original Cover serves two purposes: it adds a personal touch with color options and creates a barrier that keeps body fluids, lube, and debris off the machine's surface. Because it's water-resistant nylon, it won't soak through during use, and the four Velcro securing points keep it in place even during vigorous sessions.
One trade-off is that the cover is not a full waterproof barrier—it's water-resistant, not waterproof. If you use a lot of lube or fluids, some may seep through the seams over time. For heavy wet play, consider pairing the cover with a waterproof pad underneath.
How to Fit, Clean, and Replace Your Motorbunny Original Cover
- Fit the Cover Correctly: Slide the nylon cover over the Motorbunny base, aligning the eyelets with the Velcro straps. Pull the cover taut and secure each of the four Velcro points firmly. Make sure there are no wrinkles or loose folds that could bunch during use. A loose cover can shift during operation, so double-check each strap before starting.
- Clean After Each Use: Remove the cover by unfastening all Velcro straps. Hand wash it in cool or warm water with mild soap—dish soap or a gentle laundry detergent works well. Rinse thoroughly to remove all soap residue. Do not use bleach, fabric softener, or machine wash, as these can damage the nylon and Velcro. Residual soap can irritate skin, so rinse until the water runs clear.
- Dry Completely Before Reuse: Hang the cover to air dry in a well-ventilated area away from direct heat or sunlight. Do not put it in a dryer, as high heat can shrink the nylon or weaken the Velcro. Ensure the cover is fully dry before putting it back on the machine to prevent mildew or odors. If the cover still feels damp after a few hours, move it to a drier spot—never store it wet.
- Know When to Replace the Cover: Inspect the cover regularly for signs of wear: fraying edges, stretched-out Velcro that no longer grips, persistent stains, or a lingering odor even after washing. If the nylon develops small holes or tears, it's time for a new cover. A fresh cover also restores the snug fit and clean appearance. Most users replace the cover every 6–12 months depending on frequency of use and care routine.
Product Facts
- Motorbunny Original Cover: The Motorbunny Original Cover is made from water-resistant nylon and attaches with four Velcro securing points. It can be hand washed with soap and water and hung to dry. This means you can clean the cover quickly after each use without special products, and the Velcro system makes it easy to remove and reattach.
Motorbunny Original Cover
