How to Clean ULTRASKYN and Silicone Toys Safely
By Motorbunny - New Riding Sex Toys and Sex Machines | Published: 2026-10-16
Category: Wskazówki i pielęgnacja
Learn a safe, step-by-step routine for cleaning ULTRASKYN and silicone sex toys, with checkpoints to avoid damage and keep your machine attachments ready to use.
Quick answer
Clean ULTRASKYN and silicone toys with warm water and a mild, fragrance-free soap or a dedicated toy cleaner, then rinse and dry fully before storage. Silicone can also be boiled for deep sanitation, but ULTRASKYN should never be boiled. Always check the manufacturer's guidance for your specific attachment.
Why material matters for cleaning
Silicone is non-porous, so it does not hold onto bacteria the way porous materials can. That means silicone toy cleaning can be thorough with soap and water, and you can sterilize it by boiling if the manufacturer says it is safe. ULTRASKYN is a dual-density material made to feel lifelike, and while it can be washed, it is more sensitive to heat and harsh chemicals. Treat ULTRASKYN like a delicate item: clean it promptly, avoid boiling, and use only mild cleaners. If you are unsure about an attachment's material, clean it as if it were porous until you confirm otherwise.
What you need before you start
Gather a mild, fragrance-free soap or a toy cleaner formulated for sex toys, warm water, a clean towel or lint-free cloth, and a drying rack or clean surface. Avoid antibacterial soaps with heavy perfumes, dish soaps with degreasers, and any cleaner containing alcohol, bleach, or harsh solvents unless the manufacturer specifically approves it. For silicone attachments, you may also use a pot of boiling water if the maker says it is safe. Keep separate cleaning tools for toys versus household dishes to avoid cross-contamination.
How to wash without damaging the surface
Rinse the toy under warm, not hot, running water to remove surface residue. Apply a small amount of mild soap or toy cleaner and work it over the entire surface with your fingers or a soft cloth. Pay attention to textured areas, ridges, and the base where the attachment connects to the machine. For ULTRASKYN, do not scrub aggressively or use a rough brush; the material can tear or lose its finish. For silicone, you can be more thorough but still avoid abrasive pads. Rinse until no soap remains, because leftover cleaner can irritate sensitive skin.
Drying and storage that prevent problems
Shake off excess water and pat the toy dry with a clean, lint-free towel. Let it air dry completely before putting it away; trapped moisture can encourage mold or mildew, especially in storage containers. Store silicone and ULTRASKYN separately if they touch for long periods, because some soft materials can interact. Keep toys in a cool, dry place away from direct sunlight and heat. If you use a storage bag, choose a breathable fabric bag rather than a sealed plastic bag for long-term storage.
Step-by-step cleaning routine
- Clean immediately after use: Rinse the toy with warm water as soon as possible to prevent residue from drying on the surface. If you cannot clean it right away, at least wipe it with a damp cloth and clean it properly within a few hours. Checkpoint: do not let lubricant or body fluids dry on the toy, as it becomes harder to remove.
- Apply mild soap or toy cleaner: Use a fragrance-free, mild soap or a dedicated toy cleaner. Work it into the entire surface with your hands or a soft cloth, including the base and any textured areas. For ULTRASKYN, be gentle and avoid harsh scrubbing. Common mistake: using antibacterial or heavily perfumed soap, which can degrade the material or irritate skin.
- Rinse thoroughly with warm water: Rinse until the water runs clear and no slippery soap residue remains. Warm water is fine, but avoid hot water for ULTRASKYN as it may damage the material. For silicone, hot water is generally safe if the manufacturer allows boiling. Checkpoint: if the toy still feels slick, keep rinsing; leftover cleaner can cause irritation.
- Dry completely: Pat dry with a clean, lint-free towel and let it air dry fully before storage. Pay attention to crevices and the base where water can pool. Do not use a hair dryer or heater to speed up drying. Common mistake: storing a damp toy, which can lead to mold or mildew.
- Store safely: Place the toy in a cool, dry place away from direct sunlight. Use a breathable storage bag or a clean, dry container. Keep silicone and ULTRASKYN items separated if they will be in contact for long periods. Next step: check your toys monthly for any signs of wear, discoloration, or odor, and replace them if the material looks degraded.
Product facts that affect cleaning
- Motorbunny Original Silicone Starter Attachment Pack: The Motorbunny Original Silicone Starter Attachment Pack includes 100% silicone attachments that are durable, comfortable, and easy to clean with soap and water, toy cleaner, or by boiling. Because these are silicone, you can use the full cleaning range, including boiling, which makes deep sanitation simpler than with porous materials.
- Vac-U-Lock - 8 Inch ULTRASKYN Cock: The Vac-U-Lock 8 Inch ULTRASKYN Cock is molded from ULTRASKYN, a dual-density material with a hard inner core and soft outer layer. ULTRASKYN should not be boiled or exposed to harsh chemicals, so stick to mild soap and warm water and dry it thoroughly to protect the material.
- Premium Silicone "Lolli" Attachment: The Premium Silicone "Lolli" Attachment is 100% non-porous silicone for easy sterilization and has a wide bulb and textured front platform. Non-porous silicone can be cleaned thoroughly, but the textured surfaces need gentle attention so residue does not get trapped in the ridges.
