Orochi Bad Dragon Attachment on Motorbunny Original: First Ride
By Motorbunny - New Riding Sex Toys and Sex Machines | Published: 2026-11-03
Category: Ulasan Produk
A step-by-step first ride with the Orochi Bad Dragon attachment for Motorbunny Original: install, lube, position, and control the texture so the ribbed head works with you, not against you.
Quick answer
Install the Orochi attachment on your Motorbunny Original, apply plenty of water-based lube, start with the machine off, and lower yourself onto the ribbed head slowly before adding any speed. Treat the first ride as a texture test, not a race.
Why Orochi rewards a slower first ride
Orochi is not a smooth warm-up attachment. Its thick, ribbed head and scale-like shaft textures create a lot of concentrated sensation, so the usual advice to start slow matters more here than with plainer shapes. The first ride is about finding an angle and depth where the ribbed head feels stimulating rather than abrasive.
That is also why a short session is useful. Ten or fifteen minutes of low-speed movement tells you more about fit and comfort than a long session at high speed, and it leaves you with a clear idea of which position and depth to return to.
Size and color choices change the plan
The Orochi attachment is offered in multiple colors and sizes, so the first-ride plan depends on which you ordered. A larger size leaves less room for error on depth, while a smaller one may let you explore the textured head more quickly. Check the size you received against the product page before your first session, and adjust how far you lower yourself accordingly.
Color is purely aesthetic and has no effect on use, so do not let it influence your setup decisions.
When Orochi might not be the right first attachment
If you are completely new to riding machines, a smoother attachment is often easier to learn on. Orochi's dense texture can feel overwhelming before you have learned how your body responds to the machine's movement. Consider it a second or third attachment rather than a first purchase, unless you already know you enjoy pronounced ribbing and scale textures.
First-ride steps for the Orochi attachment
- Inspect and clean before install: Unbox the Orochi attachment, check it for damage, and wash it with warm water and mild soap before the first use. Dry it fully, then apply a small amount of water-based lubricant to the attachment's base so it seats smoothly on the Motorbunny Original. Never use silicone-based lubricant with silicone attachments; it can degrade the surface.
- Seat the attachment firmly: Align the attachment with the Motorbunny Original's mounting point and press until it sits flush. Give it a gentle tug to confirm it is secure before you turn the machine on. A wobble during use means the attachment is not fully seated; stop and reseat it.
- Apply lubricant generously: Coat the ribbed head and textured shaft with water-based lubricant, and apply more to yourself. The scale-like textures need extra lubricant to glide comfortably. Keep the bottle within reach; reapply as soon as you feel drag rather than pushing through it.
- Start with the machine off: Lower yourself onto the attachment slowly with the Motorbunny Original switched off. Find a depth where the ribbed head feels comfortable, then pause and breathe before adding any movement. If the head feels sharp or pinching, you are too deep or at the wrong angle; lift off and adjust.
- Add the lowest speed first: Turn the machine to its lowest setting and let the movement work with your position. Keep your hands on the handles or the base for stability, and stay at that speed for several minutes before considering more. Increase speed only after you can relax at the current setting.
- Try one position change per session: If you want to experiment, change your lean or hip angle once per session rather than constantly shifting. Note which position lets the ribbed head stimulate without pressure points. Stop the machine before changing position; adjusting while it runs is the most common cause of discomfort.
- Clean and dry after the ride: Remove the attachment, wash it with warm water and mild soap, rinse, and let it air-dry completely before storing it away from other silicone items. Store it separately to prevent the silicone from reacting with other materials.
Product facts
- "Orochi" Bad Dragon Attachment made for Motorbunny Original: Made of 100% body-safe platinum cured silicone. Platinum cured silicone is durable and easy to clean, so the attachment holds up to repeated use with water-based lubricant.
"Orochi" Bad Dragon Attachment made for Motorbunny Original - "Orochi" Bad Dragon Attachment made for Motorbunny Original: Features a thick, ribbed head with multiple curves converging at the tip and scale-like textures along the shaft. Those textures create intense stimulation, which is why a slow, low-speed first ride helps you find a comfortable angle and depth.
