Bad Dragon Ika Attachment for Motorbunny Original Setup
By Motorbunny - New Riding Sex Toys and Sex Machines | Published: 2026-10-25
Category: How-to Guides
Learn how to attach and use the Bad Dragon Ika tentacle dildo with your Motorbunny Original. Step-by-step setup tips for secure, pleasurable riding.
Quick answer
Attach the Bad Dragon Ika to your Motorbunny Original by removing the stock pad, placing the Ika's base centrally on the platform, and securing it with the provided strap or a compatible Vac-U-Lock adapter for a stable ride.
Why the Ika's shape matters for setup
The Ika tentacle dildo has a pronounced curve and tapered tip, designed for G-spot or prostate stimulation. Its base is wide and flat, which helps it stay put on the Motorbunny platform, but the curve means you need to orient it carefully to target the right angle during use.
Because the Ika is made of 100% platinum-cured silicone, it has a bit of grip against the platform surface. This reduces slipping but also means you should avoid lubricating the base before attaching it, or it may slide out of position.
Step-by-step setup
- Remove the stock pad: Unsnap or peel off the standard flat pad from your Motorbunny Original platform. This exposes the flat mounting surface and the strap slots. Keep the stock pad clean and store it in a dry place so you can swap back to other attachments easily.
- Position the Ika base: Place the Ika's flat base in the center of the platform, with the curve pointing forward (toward your front) for G-spot stimulation, or backward for prostate stimulation. Press down firmly to create suction if the base is smooth. Test the orientation by sitting on the Motorbunny before strapping it down—adjust the angle while it's still easy to move.
- Secure with the strap: Thread the Motorbunny's adjustable strap through the slots on the platform and over the Ika's base. Tighten evenly so the base is held flat without tilting. The strap should be snug but not so tight that it deforms the silicone. If the strap slips off the tapered edges, place a non-slip mat or a thin cloth under the base for extra grip.
- Check stability before use: Gently tug the Ika upward and side to side. If it moves more than a quarter inch, re-tighten the strap or reposition the base. A stable attachment prevents the dildo from wobbling during high-speed riding. Run the Motorbunny at low speed for 10 seconds while watching the attachment—any shift means you need to re-secure.
- Lubricate and ride: Apply a generous amount of water-based lubricant to the Ika's shaft and your body. Silicone lubricant should not be used with silicone toys. Start at a low speed and increase gradually as you find your preferred rhythm. Reapply lubricant during longer sessions—silicone toys can cause lubricant to dry faster than TPE.
Product facts
- "Ika" Bad Dragon Attachment made for Motorbunny Original: Made of 100% body-safe platinum cured silicone with a tapered shaft and sucker pads. The silicone is non-porous and easy to clean, and the tapered shape allows gradual depth control during riding.
"Ika" Bad Dragon Attachment made for Motorbunny Original
